Ducted Vacuum News and Information
Ducted/Central Vacuum System Low Suction Causes
Posted by Michael Sansom on
The following can cause low suction-
Central/Ducted Vacuum Tool Sizes Explained.
Posted by Michael Sansom on
Today there is a wide variety of vacuum tools available and each one is designed to do a particular job. It is important to purchase the right tool for the job which will maximise your ducted vacuum’s efficiency.
Ducted/Central Vacuum Hose Handle (Bent End Piece, BEP) Installation Instructions
Posted by Michael Sansom on
The BEP is only compatible with standard vacuum hose (approximate 32mm internal diameter, 39mm external diameter) and is not compatible with ducted vacuum switch hoses.
For use with all 32mm vacuum systems such as built in vacuums, ducted vacuums, central vacuum systems and all systems with a 32mm diameter wand, including brands such as Vacu Maid, Valet, iCentral, AstroVac, AussieVac,Auskey, Attila, DAS, Cyclic, Hoover, Lux, Slient Master, Electrolux, Electron, EVS, Hills, Volta, Premier Clean, Beam, Typhoon, Monarch, Pullman and more.
Tools required for fitting – Small flat blade screw driver and a sharp knife. Optional – contact adhesive.
Will a Switch Hose be compatible with my Ducted Vacuum System?
Posted by Michael Sansom on
Ducted vacuum switch hoses have a switch on the handle which allows you to switch your ducted vacuum system on or off at any time without going to the inlet. This can be useful when the phone rings or there is a knock at the door whilst you are vacuuming.